How to make a motorcycle not dead as floods

Cbmadura.com How to make a motorcycle not dead as floods - The most annoying for motorcyclists is when it rains. Why? Having to bother to stop and use the raincoat or take shelter. But there is another one of the most widely disliked by motorists, namely floods, because if not careful motor can die even bogged down because of inundated. Well, below are tips for motorcycle not dead as floods.

Tips for motorcycle not dead as floods

1. The machine is stable
For some people if the drive slowly surely glad to play the gas, if you are doing this at a time when much of the flooding was most likely the engine will die, why? because when the machine in high round and then dropped suddenly, and up again will make the engine suck up more fuel, and water can get past the exhaust motor, because it kicks back a larger machine.

2. Keep the stable high engine rotation
At the time of the engine at the height of the gas that comes out in the exhaust will be high as well, and the water didn't get to go through the exhaust

3. Do not use the undergone
Undertones are comfortable to drive, but because most use a spark plug position will fall lower, if inundated long will cause bad spark plugs.

4. Do not disconnect air filter
Removing the air filter just by letting air enter freely into combustion, without being filtered. What would happen if the water comes in, of course the machine will crash. This also applies when the heavy rain.

5. Look the other way or shelter
Try looking for other avenues that are not flooded or shelter for a while, if the flood is impossible to traverse.

OK just that his review was limited and may be useful on how to make a motorcycle not dead as floods